用“burr”造句大全，burr造句

Provided with a burr-trimming cutter, the bias-adjustable device can remove automatically the burrs on the polished rod.

But the song has lost its burr and acquired instead a Texas accent, and a few new verses and fillips by the singer.

The life of the drill bit, the burr at the outlet and the roughness of the machined surface when drilling micro holes with ultrasonic vibration are studied.

Applications of removing burr of skeleton based on PCNN

4. Reasons and influencing factors of metal burr formation are discussed; mathematical model in cutting direction burr is set up;

Side of Al/Ni strip/plate should be even cut without burr.

Firstly, gray image changed into binary image. Then, noise and stub burr is removed by using basic operation of mathematical morphology-dilation and closing operation.

Mainly explains the methods for fixture improvement and accurate grinding methods study and the measure for the control and elimination of the burr in the course of the vale spool's precision working.

Cut tube end square. Ream, burr and size.

Realistic society and will of the people like burr Ban Za in its back.

Everyone knows how Mythical National Championships are the burr under my saddle, and I just can't let well enough alone, especially when I have a point to make.

Analysis shows that the main factor of instability of insulation resistance is machining burr.

The test on copper foil in winding shows the monitoring method is effective, and the device can find flaws such as burr, Nick, and pinhole.

This form of scar treatment uses a motorized burr, which usually contains diamond particles.

The formation and critical conversion of the cutting-direction burr

The surface of the syringe must be clear and pure; rough edge, burr, plastic stream, defect are not allowed.

Place "A" panel (4" x 6"), sharp burr edge down, on bottom half of (4" x 12") so that cut edge of (4" x 6") barely covers all oil.