用“fluidization”造句大全，fluidization造句
The expansion ratio is related to the liquid flow rate, fluidization velocity and free descending velocity of the packing material.
A study on the fluidization is carried out systematically in the present dissertation, as a research subject being paid more attention with the progresses of drying technique.
Abstr: Taking the fine residual carbon powders as raw materials, the fluidization characteristics in riser and separation characteristics in cyclone were researched using a founded cold test rig.
Based upon above research, effects on the mass flow rate of powders of inventory of powders, fluidization gas velocity, reaction gas velocity and void of packed bed are discussed e.
Garbage has inhibitory effect on fluidization of bed material.
Vibration plays an important role in drying and cooling fluidization of water-bearing materials.
Improvement of the fluidization reactor applied in the synthesis of organosilicon monomer
Experiment results showed that in the transport beds of fluidization, internals in the condense phase zone gave a more obvious effect than those in the dilute phase zone.
Fluidized—bed furnace is a new type device for heat treatment, which utilises fluidization technology for moving solid particles in a state of suspension by the action of gases.
These initial successes spawned much interest in fluidization.
A new type of sand storage silo with local fluidization and siphon discharging is recommended.
Due to fluidization, the static bed of sand particles expands and the height of the expanded bed depends upon the fluidizing velocity.
Minimum fluidization velocity of bimodal polyethylene particles
The fluidization mechanism of high flowing concrete and its application in high rise frame structures are discussed and analyzed.
Reactor temperature is the most important influence factor and plays the decision role to the bio-oil production rate, the particle size and fluidization gas amount play the relative small role to it.
Experimental Research of Gas Mixing and Numerical Simulation for Gas-Solid Two Phases Flow in a Spouted-fluidization Bed;
The hydrofracturing of Budate Group is mainly related to frequent lithologic characters, tectonism and fluidization.
Considering the fluidization quality of the system, proper selection of static powder bed height and powder outlet relative height was very critical.
A mathematical model is proposed for the absence of partial fluidization and channeling in the bed.
