用“IOPS”造句大全，IOPS造句
使用的CPU类型、所需要的IOPS和预期吞吐量是准确确定所需要的HDD 数量的因数。
As Figure 4 illustrates, this time approximately 4,000 IOPS were measured on the front end.
As Figure 2 illustrates, approximately 30,000 IOPS were measured on the front end, which is an excellent number considering only eight (8) EFDs were used.
He believes SSD is a great technology to replace hard disks in very high IOPS workloads, or when data cannot go to disk and must be held by main-memory (RAM) caches.
他认为，对于IOPS非常高的工作，或者在数据不能写入磁盘，必须缓存在内存(RAM)里面的情况下，SSD是一项替换硬盘的伟大技术。
正如图4所显示的，这一次在前端所测得的IOPS值约为4,000。
事实上，在一个Symmetrix存储阵列中，一个EFD能够以大约1毫秒的响应时间实现与30个15,000r PM硬盘驱动器相同的IOPS。
图2显示，前端测得的IOPS值约为30,000，这是只使用8个EFD能达到的非常高的结果了。
In fact, in a Symmetrix storage array, one EFD can deliver IOPS equivalent to thirty 15,000 RPM hard disk drives with a response time of approximately 1 millisecond.
这些数据更关乎容量，而不是IOPS，而通过闪存获取容量的代价颇为不菲。
Figure 4 shows the IOPS that were measured on both the front end and back end during this test run.
