用“outer ring”造句大全，outer ring造句
This type bearing consists of a sleeved outer ring, multi-row balls and a retainer.
There is a snap groove in the outer ring for fitting a snap ring, so it is convenient to assemble the bearing.
Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.
Short and strong mouth, slightly bent downward, cone, Primary and outer ring, with two pale horizontal spot.
Pressure on the ball bearing outer ring with a flat seat type, aligning seat type and seat type with a self-aligning washers.
As a rule, the outside diameter of the outer ring is ground spherically, so the ring can align itself in a suitably designed sheet-steel or cast-iron housing if the beating locations are misaligned.
The process of cold rolling forming for outer ring of single freewheel of bicycle and the structure of roller and jig, and the parameters for rolling machine have been introduced.
The raceways of both the inner and outer rings of this bearing type are made with a set contact Angle.
The innermost ring of Chiyli Crater actually sits at a higher elevation than the outer ring.
These bearing types also feature two flanges on the inner ring but only one flange on the outer ring.
Adjusting the Nest thermostat is easy: you simply rotate the outer ring up or down.
Two groove of the inner ring and outer ring groove for the ball between the form of a drum, equipped with roller bearings.
To ensure efficient lubrication, the needle roller bearing has an annular groove and lubrication hole in the outer ring.
Nianpan floor, Nianpan outer ring were added to improve anti-wear protection plate rolling, grinding the material effects and the whole of life.
In the finite element model, the shaft and bearing house are set as flexible body, the stress field is investigate in the tilting case of inner ring and outer ring.
Deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies.
Results There were no statistically significant differences between age groups except for the foveola, superior outer ring, inferior outer ring and total macular volume (P
Rolling bearings. single - row angular contact ball bearings. chamfer dimensions for outer ring non - thrust side.
Leaves the outer ring is white, middle green, as if someone leaves a layer of white paint coated.
A fitting for fixedly attaching to pipes and the like includes an inner and outer ring being coaxially provided over a pipe.
However, in some situations, there are outer operation, the inner fixed play supporting role or inner and outer rings are also functioning.
The use of a snap ring inserted in the snap ring groove in the outer ring provides a particularly economic and axially space-saving arrangement (FIG 4).
Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface.
The outside diameter, outer ring width and shaft seat diameter are identical to the dimensions of the standard spherical roller bearings range.
The V-shaped unidirectional clutch is made of inner ring, outer ring, wedge and driven disk.
Ball joint housing is an outer ring of radial spherical plain bearing, made of zinc base alloy.
Inner ring and outer ring can therefore be mounted separately.
Industry and Trade co., Ltd. is located in Xintiandi Yangquan Yangquan City, south outer ring, adjacent to Shijiazhuang-Taiyuan Expressway, transportation is very convenient.
In the well-differentiated astrocytoma showed structure of ring upon ring, the inner ring was the basement membrane of blood vessel, while the outer ring was the glial membrane.
The goitre namely appears or increases, small prominence in the outer ring and the scrotum outset department, big drops to cloudy Shun, assumes the pear, swells the material to be soft.
Scientists think material from the outer ring moves inward and slams into Iapetus.
