用“mandrel”造句大全，mandrel造句

120 deg flush head break mandrel closed end blind rivets

The circular distributor, double-arm mandrel, coiler door and internal mandrel of the coiling station in the High-speed Wire Rod Mill are driven by the hydraulic systems.

Mathematic calculation approach of minimum bending radius of mandrel based on Matlab

A mandrel mill hydraulic screwdown control was successfully established at Wakayama Steel Works of Sumitomo Metal Industries, Ltd, in 1985.

The causes producing wall thickness difference in a same pierced shell are expounded and the influences of piercing, rolling and mandrel drawing on the difference are studied.

By test and analysis, the direct reasons leading to failures are the defaults in designing coiler mandrel diameter change and controlling hydraulic system program but not the system parts themselves.

air-press mandrel system

Bend test for coating (conical mandrel)

Covered wires--Method for mandrel winding test of rectangular wires

After the mandrel is melted, a thin layer of alloy remains on the propellant surface.

Ensure that the lathe dog is secured to the machined flat on the end of the mandrel and not on the smooth surface of the mandrel taper (Figure 7-44).

AX-100L Slab Thickness Machine is adopted gantry linkage structure, autofeed driven by trolly screw mandrel and America EMERSON transducer to adjust the speed steplessly.

wireline mandrel

Bend test for coating (cylindrical mandrel)

Mount the workpiece onto a lubricated mandrel of the proper size by using an arbor press.

The spiral mandrel is flexible, so the transmission line can be arranged according to the space curve.

The push unit is further provided with a cover which is covering the capacity area. One side of the covering body is arranged with a movable mandrel which passes through the push unit's long hole.

The extension of the mandrel drives a accumulative flow gauge.

A disk attached to the mandrel of a lathe to hold the work to be turned.

Hydraulic hob mandrel clamping.

The centers must be aligned and the mandrel must be free of burrs.

mandrel-cambered bowl

"The pyramid mandrel of hydraulic diameter control(with pressure drop protection)with segments is used, which is of swinging console type. The floating alignment is accepted. The recoiling is controlled by EPC. "

Mushroom head break mandrel closed end blind rivets

The mandrel must be mounted between centers and a drive plate and lathe dog must be used.