用“input power”造句大全，input power造句
The ratio of output power from an amplifier system, to the input power is normally measured in decibels.
Integrate domestic and foreign research we found that a low level of safety performance of SMEs in China is mainly due to inadequate safety input power.
It is an important factor for the perfect matching between the maximal input power of the hydraulic oil pump and the maximum output power of the engine in the design process of the hydraulic shovel.
On this foundation, in view of features that the elevator starts and stops frequently, the ideal starting time parameter and the value of feed forward adjustment when input power .
This method changes the input power of the motor.
Usually LED power and drive damage from the input power over power shock (EOS) and load side circuit fault.
The input power factor can be arbitrarily controlled within a certain control range.
It polls the Director server using REST APIs at regular intervals, for a specified duration, and collects input power data for all AEM monitored endpoints.
Proper arrangement of them significantly reduces the energy consumed and noise level and ensures the input power and noise index, solves the problem of insufficient air volume supplied, and improves the indoor thermal comfort effectively.
The interface transferring velocity increases with the input power directly.
The energy loss caused only by that is approximately equal to 40% of the input power.
With other brands used in belt-driven centrifugal blower than the same amount of wind energy under the input power of 0.7KW, saving users significant economic costs.
X-ray tube assembly input power
The ratio of output power to input power expressed as a percentage. This is generally measured under full load at nominal line voltage.
By using a new optical input power level detection and signal treatment method to control the gain of the receiver and keep its output level within the required range, a novel feedforward AGC optical receiver without radio frequency feedback circuits is realized.
Among the three-phase power-factor correction circuits, the full decoupling circuit is especially suitable for high power fields because of its high input power and good electrical performance.
The input power of any machine is equal to the output power plus the work done to overcome the friction.
The experiments successfully indicated that the transition location of laminar boundary layer can be controlled by internal acoustic excitation with an appropriate input power in a frequency range which is far beyond the Tollmien-Schlichting wave range.
The output power can never equal the input power, for there are always losses.
